APPLICATIONS


Y-joint inspection
By Frédéric REVERDY, Business Development Manager in M2M A while back we had a post about a T-joint inspection with
Read more.
Wheel inspection
Detection of small defects in wheels for railway applications.
Read more.
Welds
CHALLENGE Welds are often critical parts to inspect. They are subject to huge constrains and have to be inspected with
Read more.
Welded and seamless tube inspection system
Welded and seamless tube inspection in France. ©Metalscan.
Read more.
Weld pipe inspection
GERMANY ©Scanmaster
Read more.
Weld inspection in a rail
Sizing of the HAZ zone to determine the quality of the weld. Using a large aperture (64 elements) and a
Read more.
Weld inspection
This article shows a video of a multi-group weld inspection, using 2 phased-array and a pair of TOFD probes. With
Read more.
Turbine inspection
This example of a tree root blade shows that geometry echoes are present and the CAD overlay makes interpretation easier.
Read more.
Tube inspection using massively parallel systems
Tube inspection using massively parallel systems The objective of the NDT procedure is to detect defects from the outside of
Read more.
Tube inspection system
France ©Metalscan
Read more.
Tube inspection
This system has been installed to inspect 100% of stainless steel pipes. GERMANY ©KARL DEUTSCH videohttps://www.m2m-ndt.com/wp-content/uploads/2016/08/Thick-pipes-high-speed-inspection.mp4
Read more.
Thick-plate inspection
Thick-plate inspection The inspection of thick plates of large dimensions is a productivity challenge. While satisfying high-resolution requirements for defect
Read more.
Thick boiler tube inspection
THICK BOILER TUBE INSPECTION   Thick boiler tube application (150 mm), sizing of small defects (1.5 mm). 64-element aperture allows
Read more.
TFM image of a polyethylene sample joined by electrofusion
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies Here is a TFM image obtained on a polyethelene pipe using a
Read more.
Surface breaking crack characterization with TFM
By Frédéric REVERDY, Business Development Manager in M2M A while back I had a post about surface breaking crack characterization
Read more.
Stringer radius (using SAUL)
Stringer radius (using SAUL) The SAUL technique enables the transmission of an incident wave-front parallel to any complex surface. One
Read more.
Stiffener inspection using a linear phased array
Stiffener inspection using a linear phased array Crack detection in T-section stiffeners is a recurrent problem for aircraft manufacturers. In
Read more.
Stainless steel weld inspection using dual-matrix probes and Gekko
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies Capture has a library with existing DMA available from various vendors making
Read more.
Stainless steel pipes 100% inspected
Read more.
Splice inspection
Read more.