AEROSPACE


Thick-plate inspection
Thick-plate inspection The inspection of thick plates of large dimensions is a productivity challenge. While satisfying high-resolution requirements for defect
Read more.
Stringer radius (using SAUL)
Stringer radius (using SAUL) The SAUL technique enables the transmission of an incident wave-front parallel to any complex surface. One
Read more.
Stiffener inspection using a linear phased array
Stiffener inspection using a linear phased array Crack detection in T-section stiffeners is a recurrent problem for aircraft manufacturers. In
Read more.
Robotic inspection of composites parts
USA  
Read more.
PMMA inspection
This video shows an electronic scanning of a PMMA (polymethyl methacrylate also called acrylic glass) plate using the flaw detector
Read more.
Industrial system for composites inspection using SAUL
SAUL NDT for Airbus A350 composite parts ©Stelia Aerospace Composites     The SAUL technique enables the transmission of an
Read more.
Fastener-hole inspection in pulse-echo mode
Fastener-hole inspection in pulse-echo mode The goal of the work was to use simulation in order to determine the resolution
Read more.
Fastener-hole inspection in pitch-catch mode
Fastener-hole inspection in pitch-catch mode In the aerospace industry, detecting the cracks that sometimes develop around fastener holes is a
Read more.
Composites inspection
COMPOSITE INSPECTION USING A 3-AXIS ENCODED SCANNER   GEKKO is the only portable unit compatible with 3-axis scanners making it
Read more.
Bearing Ring Testing
©KD Zone without defects, Sound path approx 120 mm   Zone with 0.5 mm FBH (depth 0.5 mm) on flat
Read more.
Aircraft component inspection
Effect of the aperture on the SNR Let's look at the detection of a fatigue crack (roughly a triangular shape
Read more.