Weld inspection in a rail
Sizing of the HAZ zone to determine the quality of the weld. Using a large aperture (64 elements) and aRead more.
Surface breaking crack characterization with TFM
By Frédéric REVERDY, Business Development Manager in M2M A while back I had a post about surface breaking crack characterizationRead more.
Stiffener inspection using a linear phased array
Stiffener inspection using a linear phased arrayCrack detection in T-section stiffeners is a recurrent problem for aircraft manufacturers. In mostRead more.
Solid Railway Axle inspection
With an aperture of 64 elements and a customized wedge, GEKKO can focus the energy farther in the component andRead more.
Screw thread inspection
27-mm long screw thread inspection with TFM technique. Optimal resolution is obtained along the thread. Probe: PA, 5 MHz, 64Read more.
This video shows an electronic scanning of a PMMA (polymethyl methacrylate also called acrylic glass) plate using the flaw detectorRead more.
Pitting detection with TFM and MANTIS
Here is a comparison of a linear scanning using 8 elements focused close to the backwall and a TFM usingRead more.
Incomplete root penetration (bridging) on a T section
By Frédéric REVERDY, Business Development Manager in M2M Detection of an incomplete root penetration (bridging) on a T section. TheRead more.
Friction Stir Weld (FSW) inspection using TFM
A T-joint is welded using a FSW process. The sample contains a 0.2 mm side-drilled located between the two weldsRead more.