Portable phased-array ultrasonic flaw detector
PHASED-ARRAY FLAW DETECTOR and
IMAGER for EASIER
TFM / E-scan comparison on Corrosion with GEKKO
This video shows a corrosion mapping inspection using a manual scanner and real-time Total Focusing Method.
Then it compares TFM and Electronic scanning for differents defects in corrosion, using the same probe position.
3-axis encoded nozzle inspection using GEKKO
With the possibility to define nozzle type geometries on-board,
the GEKKO can be used for 3-axis encoded nozzle inspections.
Sscan images superimposed on the Cross-section overlays of the
nozzle are calculated as the operator moves the probes.
The Gekko is the only portable unit compatible with 3-axis
scanners making it possible to use with mouse type scanner
for very fast scanning of large plates.
Made for field
GEKKO is the ideal flaw detector
for harsh environments. With reinforced elastomers and its
mechanical characteristics, GEKKO is conformed to the
Flaw detector GEKKO is IP 66 allowing an operator to use it in
rainy and dusty environments. GEKKO supports extreme weather
conditions. With operating temperatures ranging from -10°C to
45°C and a storage temperature range from -10 to 60°C with
battery, GEKKO deals with the roughest conditions.
Corrosion mapping on flaw detector GEKKO, using real-time
Total Focusing Method (TFM) :
- Reduced dead zone: corrosion detection less than 1mm from
the front surface
- Less than 1-mm pitting detection