M2M ndt phased array for non destructive testing NDT
        M2M do Brasil sistemas phased array industriais END M2M China, M2M ndt phased array products for nondestructive testing NDT M2M Insight KK Japenese non destructive testing phased array products
M2M

phased-array technologies

MULTIX++

PAUT equipment for industrial NDT application

UNCOMPROSIDED PERFORMANCES

for HIGH-SPEED INSPECTION

M2M_3D Gek view

FAST mode

One advantage using a MultiX ++ full parallel system is the possibility to fire several apertures simultaneously on one or several probes improving greatly the productivity of an inspection.

 


 

PARALLEL SYSTEMS

SEVERAL APERTURES FIRED SIMULTANEOUSLY


For a 128-element system, up to 4 sub-apertures can be fired in parallel leading to gains in productivity of nearly x4 with no compromise on the resolution. The following illustration shows the example of four sub-apertures fired simultaneously using the fast mode interface.



 
 
 

INDUSTRIAL APPLICATION

HIGH SPEED COMPOSITE INSPECTION


A carbon epoxy plate was inspected with a MultiX++ system using the new Multi2000 V8 version. Thanks to the parallel architecture of the MultiX++, two sub-apertures were fired in parallel with a 64-element probe. A substantial improvement (x2) of the inspection speed, up to 400mm/s, has been obtained with a pixel resolution of 0.5x0.5mm, including full A-Scan storage. Multi2000 V8 is linked directly to CIVA Analysis for powerful post-processing, analysis and 3D visualization of defects.


Multi2000 V8 version for NDT



Spec MultiX++ Phased array ultrasound for NDT MultiX++ Phased array ultrasound for NDT