Phased-array technology

Phased-array probes are composed of several piezoelectric crystals that can transmit/receive independently at different times. To focus the ultrasonic beam, time delays are applied to the elements to create constructive interference of the wave fronts, allowing the energy to be focused at any depth in the test specimen undergoing inspection.

This principle is illustrated in the right picture, where delay laws have been computed to focus the acoustic beam at a specified depth and angle. As shown in the figure, each element radiates a spherical wave at a specified time. The superposition of these wavelets results in an almost planar wave front at the specified location.

Before and after the targeted focal spot, wave fronts are spherically converging and diverging, respectively. A few examples of delay-law computation are displayed in the figure hereunder. When no delay laws are applied, the resulting ultrasonic beam is unfocused and is equivalent to the beam generated by a conventional flat transducer. The natural “pseudo focalization” evident in the image corresponds to the near-field distance of the probe. The configuration illustrated in b results in the same ultrasonic beam that would be generated by a conventional flat transducer used in conjunction with a wedge.


Examples of delay-laws and visualization of the radiated acoustic beam (displacement field). Calculations made using CIVA simulation software: (a) no delay-laws applied, (b) steering only, (c) depth focusing and (d) combined steering and depth focusing.

In this case, there is no focusing of the ultrasonic energy; the applied delay laws result in steering of the ultrasonic beam. Figures c and d are the same configurations as illustrated in a and b, respectively, except that the delay laws have been modified to focus the acoustic energy at a specified depth. In both images (c and d), it is evident that the focal spot is narrower and more localized. To obtain the same results with a conventional probe would require using a specially designed crystal shaped to obtain the desired focal point.



Principle of phased-arrays; delay laws calculated to focus at a given depth and angle


Mahaut S., Chatillon S., Kerbrat E., Porre J., Calmon P. and Roy O., “New features for phased array techniques inspections: simulation and experiments”, Proceedings of the WCNDT, 2004.

Roy O., Mahaut S. and Casula O., “Development of a smart flexible transducer to inspect component of complex geometry: modeling and experiments”, Review of Quantitative Nondestructive Evaluation, Vol. 21, American Institute of Physics, 2002.

Mahaut S., Chatillon S., Raillon-Picot R. and Calmon P., “Simulation and application of dynamic inspection modes using ultrasonic phased arrays”, Review of Quantitative Nondestructive Evaluation, Vol. 23, American Institute of Physics, 2004.

Neau G., Hopkins D., Tretout H, and Boyer L., “Phased-array applications for aircraft maintenance, manufacturing and development”, Aerospace Testing Expo 2006.


Advantage of PA

Advantage of phased-array | Read the full article here

How are PA used?

How are phased-array typically used? | Read the full article here


Time of flight diffraction (TOFD) | Read the full article here

3D imaging

3D imaging, data viewer | Read the full article here

Analysis Capabilities

Analysis Capabilities | Read the full article here

Modeling & driving 2D arrays

Modeling and driving 2D arrays | Read the full article here