This article shows a video of a multi-group weld inspection, using 2 phased-array and a pair of TOFD probes. WithRead more.
Tube inspection using massively parallel systems
Tube inspection using massively parallel systems The objective of the NDT procedure is to detect defects from the outside ofRead more.
TFM image of a polyethylene sample joined by electrofusion
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies Here is a TFM image obtained on a polyethelene pipe using aRead more.
Surface breaking crack characterization with TFM
By Frédéric REVERDY, Business Development Manager in M2M A while back I had a post about surface breaking crack characterizationRead more.
Screw thread inspection
27-mm long screw thread inspection with TFM technique. Optimal resolution is obtained along the thread. Probe: PA, 5 MHz, 64Read more.
Polyethylene weld inspection using TFM
Guillaume Neau, VP sales M2M products at Eddyfi Technologies, explaining the TFM imaging of a polyethylene weld inspection, using a 2MHzRead more.
Pitting detection with TFM and MANTIS
Here is a comparison of a linear scanning using 8 elements focused close to the backwall and a TFM usingRead more.
Phased-array bolt inspection with Gekko
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies We detected a 0.5-mm high crack hidden in the threads of aRead more.
PAUT T-joint inspection
Crack detection in a T-joint using GEKKO. We are looking at a 5-mm under-bead crack in one of theRead more.
Offshore bolt inspection
In Brazil, Sub Sea Services is using the phased-array flaw detector and imager GEKKO to inspect bolts in offshore conditions.Read more.
Nozzle-to-pipe inspection from the nozzle side
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies A while back we posted an article showing the application developed forRead more.
Nozzle inspection on GEKKO
By Frédéric REVERDY, Business Development Manager in M2M Ultrasonic Inspection of nozzles has always been a challenge due to theRead more.
Inspection of Electro Fusion Fittings using GEKKO
Watch the full video here This video shows an inspection of Electro Fusion Fittings using flaw detector GEKKO, a 5Read more.
Inspection of a small nozzle with GEKKO
By Frédéric REVERDY, Business Development Manager in M2M We looked at a small nozzle (1" diameter) with a 5L16 smallRead more.
Using Total Focusing Method (TFM) for the inspection of inconel weld, a extended vizualisation area is obtained. Defects are detectedRead more.
Incomplete root penetration (bridging) on a T section
By Frédéric REVERDY, Business Development Manager in M2M Detection of an incomplete root penetration (bridging) on a T section. TheRead more.
Hydrogen Induced Cracking (HIC)
The molecular hydrogen formed in situ produces blisters, and adjacent blisters subsequently are connected on different planes in the metal.HICRead more.
High temperature hydrogen attack (HTHA)
HTHA damage is detected using AUBT method (Advanced Ultrasonic Backscattering Technique) that evaluates the frequency and velocity dependence to aRead more.
Heat exchanger tube inspection
M2M has been working with Metalscan for the integration of these MultiX++ instrumentation in India.Read more.