BLOG


M2M Fast TFM Eddyfi Technologies
Need for Speed…TFM Speed
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies   Back in 2014, M2M now Eddyfi, was the first one on the
Read more.
M2M MANTIS on cover of the ASNT Market Place Product Guide
M2M #Mantis powered by #Capture version 2.3 and new #TOFD probes with John Skidmore. @Dillon Smith spotted live and on the
Read more.
Matrix array with the M2M Gekko
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies Matrix arrays can inspect a full volume by steering the ultrasonic energy in
Read more.
M2M GEKKO, ANALYSIS COLOR PALETTE IN CAPTURE v2.3
Analysis on M2M Gekko Capture 2.3
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies The following image is an inspection done with two phased-array probes. In the
Read more.
M2M Capture PAUT software for NDT
New tools to avoid missing data in M2M Capture
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies The right scanning speed depends on the PRF of the equipment, the soundpath
Read more.
Delay law calculator extended in M2M Capture V2.3
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies Another peak view at the 2.3 version of M2M Capture coming up
Read more.
Wizard to check the angle/height of a wedge
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies A sectorial view is based on the ultrasonic and geometrical parameters of
Read more.
curved wedge calibration
Curved wedge calibration in M2M Capture V2.3 software
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies A sneak preview of one of the many features that will be
Read more.
Stainless steel weld inspection using dual-matrix probes and Gekko
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies Capture has a library with existing DMA available from various vendors making
Read more.
M2M Capture phased array ultrasound NDT
Phased-array bolt inspection with Gekko
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies We detected a 0.5-mm high crack hidden in the threads of a
Read more.
M2M GEKKO PAUT phased array ultrasound NDT
FMC data analysis with the Gekko and CIVA Analysis
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies FMC data analysis with the Gekko and CIVA Analysis The Gekko and
Read more.
Pitting detection with TFM and MANTIS
Here is a comparison of a linear scanning using 8 elements focused close to the backwall and a TFM using
Read more.
Flange corrosion
TFM and PAUT combined on flange face corrosion: A dedicated application developed by Buffalo Inspection. GEKKO and the TFM function
Read more.
Industrial system for composites inspection using SAUL
SAUL NDT for Airbus A350 composite parts ©Stelia Aerospace Composites     The SAUL technique enables the transmission of an
Read more.
TFM image of a polyethylene sample joined by electrofusion
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies Here is a TFM image obtained on a polyethelene pipe using a
Read more.
Polyethylene weld inspection using TFM
Guillaume Neau, VP sales M2M products at Eddyfi Technologies, explaining the TFM imaging of a polyethylene weld inspection, using a 2MHz
Read more.
M2M GEKKO Phased-array flaw detector
GEKKO recognized in Shell Tiger Times
February 2018 The Shell Geismar Tiger AO4 project has been saving time using the phased-array flaw detector GEKKO to inspect
Read more.
Nozzle-to-pipe inspection from the nozzle side
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies A while back we posted an article showing the application developed for
Read more.
Acquisition of the Full Matrix Capture (FMC) data for post-processing
By Frédéric REVERDY, Business Development Manager in M2M While both the Gekko and the Mantis were developed for the field,
Read more.
Inspection of a small nozzle with GEKKO
By Frédéric REVERDY, Business Development Manager in M2M We looked at a small nozzle (1" diameter) with a 5L16 small
Read more.