BLOG


TCG for TFM using an angled wedge in GEKKO
By Frédéric REVERDY, Business Development Manager in M2M Following a question that has been asked in a previous post, about the
Read more.
Why 800% screen height?
By Frédéric REVERDY, Business Development Manager in M2M     We are looking to detect a notch along a hole
Read more.
Nozzle inspection on GEKKO
By Frédéric REVERDY, Business Development Manager in M2M Ultrasonic Inspection of nozzles has always been a challenge due to the
Read more.
Composites inspection
 GEKKO is the only portable unit compatible with 3-axis scanners making it possible to use with mouse type scanner for
Read more.
Nozzle inspection
M2M has developed a unique nozzle inspection application that allows: - to define a nozzle geometry on board - to display in
Read more.
Thick boiler tube inspection
 Thick boiler tube application (150 mm), sizing of small defects (1.5 mm).64-element aperture allows to focus the beam and see
Read more.
Welds
Welds are often critical parts to inspect. They are subject to huge constrains and have to be inspected with NDT
Read more.
Corrosion
Corrosion can induce wall thickness and pitting. Challenge is to map fast with high accuracy and high probability of detection.The
Read more.
Field inspection of a nozzle using GEKKO
By Frédéric REVERDY, Business Development Manager in M2M   Even without scanner it is possible to have a cross-section by
Read more.
Friction Stir Weld (FSW) inspection using TFM
A T-joint is welded using a FSW process. The sample contains a 0.2 mm side-drilled located between the two welds
Read more.
Aircraft component inspection
Effect of the aperture on the SNR Let's look at the detection of a fatigue crack (roughly a triangular shape
Read more.
GEKKO has molted
14/06/2017 M2M, introduces the latest release of GEKKO 2.0. It improves productivity and ergonomics while keeping up with innovations in
Read more.
Delay law Focalization in M2M Gekko
Delay laws are in essence what phased-array technique is all about. We can electronically scan, steer and focus the energy
Read more.
Corrosion mapping improvement
(Portuguese version only) Avanço da monitoração da corrosão pela técnica ultrassônica phased array FMC/TFM   SINOPSE A contínua monitoração do
Read more.
GEKKO recognised CSWIP and PCN
13/04/2016 Flaw detector GEKKO recognised CSWIP and PCN by TWI training and examination services Flaw detector GEKKO is now certified by CSWIP and
Read more.
Why 64 elements?
By Guillaume Neau, VP M2M business development at Eddyfi Technologies Here is an example of the importance of the probe aperture
Read more.
New standard ISO 18563-1:2015
M2M ready for phased-array new standard ISO 18563-1:2015 M2M, Les Ulis, June 29th 2015 – Since June 2015, a new
Read more.