The M2M PantherTM product range combines speed and performance of phased-array ultrasound technology in a compact format. Targeted towards integrators for inline inspections and laboratories for R&D,
Panther products offer a flexible and scalable solution for generic and custom NDT.
REAL-TIME TOTAL FOCUSING METHOD (TFM) FOR HIGH SPEED INSPECTION
Recognized amongst the highest-resolution PAUT techniques, TFM is natively implemented on Panther. Combined with unparalleled data throughput, Panther offers faster imaging of larger inspection zones for easier evaluation.
COMPACT, RUGGED & SCALABLE
From 32:128 to 2048:2048 configurations, Panther compact units are scalable for automated inspection. With up to 16 units used in parallel, Panther offers a substantial increase in inspection speed.
• Unlimited number of probes
• Unlimited number of groups
• Up 13k+ focal laws
Panther is IP54. Its casing has external fans for optimized heat dissipation with no air intake.
FASTEST DATA THROUGHPUT
Uniquely equipped with a 320MB/s high-speed link, Panther offers the fastest data throughput of the market.
ADVANCED PHASED-ARRAY MODES
The CIVA-based AcquireTM monitoring software and its extensive SDK allow managing fast industrial modes and advanced laboratory configurations:
• 3D CAD configuration and rendering
• LINEAR, MATRIX, DLA, DMA, DAISY, ANNULAR, SECTORIAL
• PE, TOFD, PAUT, FMC, PWI, TFM Imaging techniques
• FAST modes
• SAUL modes
• Adaptive TFM modes
• 3D real-time imaging
FOR A WIDE RANGE OF INDUSTRIAL APPLICATIONS
• Oil & Gas
• Power generation
AcquireTM is M2M’s up-to-date acquisition software dedicated to advanced Phased-Array UT, TFM settings and imaging. AcquireTM software has been designed for both Industrial applications and laboratory demonstration. Acquire is able to drive and visualize PE, TOFD and Phased Array configuration as well as TFM modes (FMC, PWI, any custom transmission).
AAcquire’s inspection data files are fully compatible with both CIVA and Enlight Analysis software. EnlightTM add-on extends standards AcquireTM views (A-B-S-D-C-Scan + Top, Side, Front views cumulated, TFM & 3D views) to 3D merging of data, automatic analysis, and advanced reporting.
In addition to real time TFM imaging, full waveform FMC data acquired by PantherTM can also be post-processed by CIVA Analysis add-on.
SOFTWARE DEVELOPMENT KIT (SDK)
In addition to Acquire acquisition software, M2M offers a Software Development Kit (SDK) to customize application based software interface for a fully automated inspection solution.
|L x W x H: 300mm x 220mm x 155mm||Weight: 6kg|
|Operating temperature range: from -10°C to 50°C | 14°F to 120°F||IP54|
|Storage temperature range: -10°C to 60°C | 14°F to 140°F||Power supply: 240V50Hz – 110V/60Hz|
|Linear scanning, sectorial scanning, parallel shooting, ultrafast mixed modes||Linear, Matrix, DLA and DMA, Annular and Daisy probes|
|Scalable up to 16 Panther units (2048 channels) | Maximum single aperture : 256 channels||Unlimited probe number | No group limitation | Up to 13100 focal laws|
|Delay-law computation for standard and parametric shapes (plates, cylinders, Butt Welds, T K & Y welds, elbow, nozzle, turbine blade, nozzles,…) as well as 2D and 3D CAD||Focusing mode: true depth, sound path, projection|
|REAL-TIME TFM, FMC, PWI|
|Reconstruction channels: up to 128||Max number of pixels for the reconstructed image: more than 1 Million|
|Max refresh rate: up to 500fps (depends on the pixel numbers)||Multiple Sound paths: direct (L or S), indirect and converted modes, Modes superposition|
|128 phased-array channels*:||Bipolar square pulse, width: 30ns to 2000ns|
|Voltage amplitude: max 120V with 1V step|
|Max. PRF: up to 30kHz|
|128 phased-array channels*:||Input impedance: 50 Ω||Gain: up to 120dB (0.1dB step)|
|Frequency range: 0.4 to 20MHz||Cross-talk between two channels < 50 dB|
|Max. input signal: 1.8Vpp||Ultralow noise amplifier|
|Digitizing and real-time summation on 128 channels||Resolution: 14bit | Dynamic: 16bit|
|IIR filters||Max. sampling frequency: 125 MHz|
|Rectified, RF, envelope||Digitizing depth up to 16k points|
|Max delay: 1.6 ms||Max A-scan range 65k points|
|A-Scan/Peak data recording||800% amplitude range|
|High speed FMC recording (320 MB/s)||Inspection data file size: hard drive limitation|
|Acquisition trigger on time, event, encoder||Data transfer through USB3|
|CAD overlay and 3D view||Amplitude balancing|
|Real-time phased array calculator||Probe design | Weld geometry design|
|Wedge calibration (angle, height)|
|Amplitude calibration (TCG, DAC)||Part geometry with parametric shapes (plates, cylinders, Butt Welds, T K & Y welds, elbow, nozzle, turbine blade, nozzles,…) as well as 2D and 3D CAD|
|A-Scan, B-Scan, C-Scan, D-Scan, Echodynamic, Top - Side - Front views||Amplitude range: up to 800%|
|3D view, Analysis gates||CAD part geometry: plate, cylinder, T or Y section, nozzle|
|Post-processing of TFM reconstruction of recorded FMC/PWI data acquisition processing in CAD geometry||CAD butt weld geometry|
|Compatible with EnlightTM Enlight PlusTM, CIVA and ULTIS software||Customizable inspection report|
|1 IPEX connector for phased-array (can be upgraded to 2 with splitter)||1 fiber optic port|
|4 Lemo 00 | 3 encoder inputs||1 external trigger|
|1 USB 3.0 high speed link||1 ultra high speed summation port (for summation between modules)|