By Frédéric REVERDY, Business Development Manager in M2M A while back we had a post about a T-joint inspection withRead more.
Welds are often critical parts to inspect. They are subject to huge constrains and have to be inspected with NDTRead more.
Welded and seamless tube inspection system
Welded and seamless tube inspection in France. ©Metalscan.Read more.
Weld inspection in a rail
Sizing of the HAZ zone to determine the quality of the weld. Using a large aperture (64 elements) and aRead more.
This article shows a video of a multi-group weld inspection, using 2 phased-array and a pair of TOFD probes. WithRead more.
This example of a tree root blade shows that geometry echoes are present and the CAD overlay makes interpretation easier.Read more.
Tube inspection using massively parallel systems
Tube inspection using massively parallel systems The objective of the NDT procedure is to detect defects from the outside ofRead more.
This system has been installed to inspect 100% of stainless steel pipes. GERMANY ©KARL DEUTSCHRead more.
Thick-plate inspection The inspection of thick plates of large dimensions is a productivity challenge. While satisfying high-resolution requirements for defectRead more.
Thick boiler tube inspection
Thick boiler tube application (150 mm), sizing of small defects (1.5 mm).64-element aperture allows to focus the beam and seeRead more.
TFM image of a polyethylene sample joined by electrofusion
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies Here is a TFM image obtained on a polyethelene pipe using aRead more.
Surface breaking crack characterization with TFM
By Frédéric REVERDY, Business Development Manager in M2M A while back I had a post about surface breaking crack characterizationRead more.
Stringer radius (using SAUL)
The SAUL technique enables the transmission of an incident wave-front parallel to any complex surface. One specimen presenting variable geometriesRead more.
Stiffener inspection using a linear phased array
Stiffener inspection using a linear phased arrayCrack detection in T-section stiffeners is a recurrent problem for aircraft manufacturers. In mostRead more.
Stainless steel weld inspection using dual-matrix probes and Gekko
By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies Capture has a library with existing DMA available from various vendors makingRead more.