GEKKO zh


Y型接口检测

作者: Frédéric REVERDY,  M2M产品开发经理 不久前,我们有一篇关于与GEKKO进行T型接口检测的文章。我们刚从Sonaspection那里得到了一个漂亮的碳钢Y型接头,里面有三个缺陷。今天我们将看一下角焊缝下面的层状撕裂。在GEKKO中,可以定义该组件并将探头定位在其任何表面上。我们将探头沿着腹板的一个表面定位。第一行显示在没有缺陷时获得的Sscan。我们可以看到有一个强烈的回声。通过在反射后重建Sscan,我们可以看到这个回波与法兰的后壁完美对齐,使其易于解释。第二行显示层流撕裂。 Sscan显示了几个回波,如果没有Y形接头的叠加,可能难以解释。通过从腹板的另一侧观察具有反射的相同数据,可以正确地定位层流撕裂和后壁的一部分。 下面的视频显示了由Sonaspection制造的Y形接头的检查,其中有3个缺陷(根部裂缝,层流撕裂和LOP)。 我们使用5L64探头和T55楔块定位在腹板的一个表面上,我们使用简单的线编码器对数据进行编码。 在Y形接头的轮廓的支持和反射后表示数据的可能性的情况下,可以检测和表征所有缺陷。 我们的新便携式探伤仪MANTIS也支持此功能。     #M2M #Gekko #Capture #Mantis #Yjoint #Ysection #Fillet #weld #joint


Need for Speed…TFM Speed ch

By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies   Back in 2014, M2M now Eddyfi, was the first one on the starting block to start the TFM race on a portable […]

M2M Fast TFM Eddyfi Technologies

Matrix array with the M2M Gekko ch

By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies Matrix arrays can inspect a full volume by steering the ultrasonic energy in various planes. The M2M Gekko can define and handle matrix […]


Analysis on M2M Gekko Capture 2.3

By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies The following image is an inspection done with two phased-array probes. In the new version of M2M Capture, it is now possible to […]

M2M GEKKO, ANALYSIS COLOR PALETTE IN CAPTURE v2.3

Why 64 elements?

By Guillaume Neau, VP M2M business development at Eddyfi Technologies Here is an example of the importance of the probe aperture for defect characterization. The same cluster of 0.5mm SDH viewed […]

M2M GEKKO 64 elements

Delay law Focalization in M2M Gekko

Delay laws are in essence what phased-array technique is all about. We can electronically scan, steer and focus the energy by adapting the time delay to each element. Let’s focus […]


New tools to avoid missing data in M2M Capture

By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies The right scanning speed depends on the PRF of the equipment, the soundpath of the ultrasound and the amount of data that the […]

M2M Capture PAUT software for NDT

Delay law calculator extended in M2M Capture V2.3

By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies Another peak view at the 2.3 version of M2M Capture coming up in the next couple of days. M2M Capture can handle […]


Wizard to check the angle/height of a wedge

By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies A sectorial view is based on the ultrasonic and geometrical parameters of the material, probe and wedge entered by the operator. If […]


FMC data analysis with the Gekko and CIVA Analysis zh

By Frederic Reverdy, M2M Product Sales Specialist at Eddyfi Technologies FMC data analysis with the Gekko and CIVA Analysis The Gekko and the Mantis are portable phased-array units that offer real-time TFM […]

M2M GEKKO PAUT phased array ultrasound NDT