M2M PANTHER


全新的相控阵全聚焦PAUT/TFM 成像仪

 

M2M PANTHER 是一款兼顾高速检测与实时成像性能的紧凑型相控系统主机,专为中大型工业在线检测集成与研究实验室而设计。 嵌入了超声高速相控阵 (PAUT) 和实时全聚焦成像技术 (TFM)双重解决方案,使其成为研发和在线检测的优选工具。 搭载了最新操作软件ACQUIRE, PANTHER 是目前市场上速度最快,功能最全面的超声波相控阵/实时全聚焦(PAUT/TFM)综合解决方案平台。

满足最高的市场需求

为了缩短检测时间并提高效率,M2M PANTHER独有设计的 320MByte/s高速数据传输能力,使其成为市场上数据传输最快的在线检测仪。

所见即所得

M2M PANTHER配置了高达150万像素的超高分辨率实时全聚焦成像技术(TFM),能提供实时的高清图像,从而得到更清晰的全聚焦检测结果,让检测评估更简单。

紧凑、坚固和可扩展

M2M PANTHER 拥有紧凑(300x220x155mm)的结构设计,符合 IP54要求,平行通道设计,支持多设备联机工作 (最多16 台128 通道设备并联工作),可以满足检测应用中最苛刻的速度和分辨率要求。

目标客户

 

•实验室
•研发机构
•工业集成商

 

150万像素TFM实时成像

功能

 

高级相控阵数据采集软件

ACQUIRE是M2M的最新采集软件,专用于高级PAUT,TFM设置和成像。 M2M ACQUIRE软件专为工业应用和实验室而设计。

 


M2M ACQUIRE 功能:

• 3D CAD 建模和缺陷/结构合并
• 支持探头类型:线阵、面阵、双晶线阵、双晶面阵、菊花阵、环阵探头、扇阵探头
• PE, TOFD, PAUT,串列扫查, FMC, PWI, TFM成像
• 自适应ATFM 模式
• 3D 实时成像

• 不限探头数量
• 不限组数

 

高级分析

M2M ACQUIRE的检测数据文件兼容M2M ENLIGHT, CIVA和 ULTIS分析软件。

M2M ENLIGHT 将标准M2M ACQUIRE 视图 (A-B-S-D-C-扫 + 顶,侧,前视图结合, TFM & 3D 报告) 扩展到3D 数据合并,自动分析,然后生成高级报告。M2M PANTHER兼容CIVA Analysis,用户可以存储完整FMC数据,然后在CIVA Analysis中对采集的FMC数据进行后期重建以提高TFM图像质量,也可以使用其他成像模式重新计算成像。

关于Enlight,了解更多

 

软件工具开发包(SDK)

除了M2M ACQUIRE 数据采集软件, M2M 还提供一整套的软件工具开发包(SDK) 以满足实现全自动检测的定制需求:

• 用户可对M2M ACQUIRE 软件进行实时控制,包括 : 增益,TCG,闸门,警报,编码器等
• 实时数据传输(数据服务器)
• 兼容几乎所有支持TCP/IP传输协议的编程语言
• 不需要很多硬件知识:M2M所有的仪器都有相同的程序

关于SDK,了解更多

M2M ACQUIRE PHASED ARRAY ULTRASOUND software for M2M Panther

Acquisition of a composite part inspection with the M2M ACQUIRE software

 

TFM multimode reconstruction (TT, TTT, TTTT) in 1.5 million pixels zone in a 3D CAD

M2M ENLIGHT analysis sotware

视频

下载

SPECIFICATIONS

 

GENERAL
L x W x H: 300mm x 220mm x 155mm Weight: 6kg
Operating temperature range: from -10°C to 50°C  |  14°F to 120°F IP54
Storage temperature range: -10°C to 60°C |  14°F to 140°F Power supply: 240V50Hz – 110V/60Hz
PHASED-ARRAY
Linear scanning, sectorial scanning, parallel shooting,  ultrafast mixed modes Linear, Matrix, DLA and DMA, Annular and Daisy probes
Scalable up to 16 Panther units (2048 channels) | Maximum single aperture : 256 channels Unlimited probe number |  No group limitation | Up to 13100 focal laws
Delay-law computation for standard and parametric shapes (plates, cylinders, Butt Welds, T K & Y welds, elbow, nozzle, turbine blade, nozzles,…) as well as 2D and 3D CAD Focusing mode: true depth, sound path, projection
REAL-TIME TFM, FMC, PWI
Reconstruction channels: up to 128 Max number of pixels for the reconstructed image: more than 1 Million
Max refresh rate: up to 500fps (depends on the pixel numbers) Multiple Sound paths: direct (L or S), indirect and converted modes, Modes superposition
PULSERS
128 phased-array channels*: Bipolar square pulse, width: 30ns to 2000ns
Voltage amplitude: max 120V with 1V step
Max. PRF: up to 30kHz
RECEIVERS
128 phased-array channels*: Input impedance: 50 Ω Gain: up to 120dB (0.1dB step)
Frequency range: 0.4 to 20MHz Cross-talk between two channels < 50 dB
Max. input signal: 1.8Vpp Ultralow noise amplifier
DIGITIZER
Digitizing and real-time summation on 128 channels Resolution: 14bit     |     Dynamic: 16bit
IIR filters Max. sampling frequency: 125 MHz
Rectified, RF, envelope Digitizing depth up to 16k points
Max delay: 1.6 ms Max A-scan range 65k points
ACQUISITION
A-Scan/Peak data recording 800% amplitude range
High speed FMC recording (320 MB/s) Inspection data file size: hard drive limitation
Acquisition trigger on time, event, encoder Data transfer through USB3
WIZARDS
CAD overlay and 3D view Amplitude balancing
Real-time phased array calculator Probe design   |  Weld geometry design
Wedge calibration (angle, height)
Amplitude calibration (TCG, DAC) Part geometry with parametric shapes (plates, cylinders, Butt Welds, T K & Y welds, elbow, nozzle, turbine blade, nozzles,…) as well as 2D and 3D CAD
ANALYSIS
A-Scan, B-Scan, C-Scan, D-Scan, Echodynamic, Top - Side - Front views Amplitude range: up to 800%
3D view, Analysis gates CAD part geometry: plate, cylinder, T or Y section, nozzle
Post-processing of TFM reconstruction of recorded FMC/PWI data acquisition processing in CAD geometry CAD butt weld geometry
Compatible with EnlightTM  Enlight PlusTM, CIVA and ULTIS software Customizable inspection report
I-O
1 IPEX connector for phased-array (can be upgraded to 2 with splitter) 1 fiber optic port
4 Lemo 00     |     3 encoder inputs 1 external trigger
1 USB 3.0 high speed link 1 ultra high speed summation port (for summation between modules)

 

Find out more about M2M PANTHER, book a demo or simply stay up-to-date

Contact meBook a demoStay up-to-date

captcha